Acapela™

Diseases: Coryneum Blight/Shothole, Brown rot, Blossom Blight

            Rates:  0.24 to 0.35L/ac (0.6-0.88L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval.  Use higher rate and shorter interval when disease pressure is high. 

Additional Information:  Do NOT apply by air.

Diseases: Common leaf spot, Stemphylium leafspot

        Rates: 0.18 to 0.35L/ac (0.44-0.88L/ha) 

Application Information: Begin applications in the spring at green-up and once 1-3 new leaves have grown after each cutting.  Initiate applications prior to disease development and no later than 14-days prior to cutting.  Use higher rate and shorter interval when disease pressure is high.

Includes the following: Garlic bulb, Onion bulb, Onion, Chinese bulb, Fresh Green Onion, Macrostem Onion, Pearl Onion, Potato Onion bulb,  Tree Onion Tops, Welsh Onion Tops, Shallot bulb, Shallot Fresh, Leaves Cultivars, varieties, and /or hybrids of these.

Diseases: Purple blotch, Botrytis neck rot

        Rates:  0.18 to 0.35L/ac (0.44-0.88L/ha)

Diseases: Botrytis Blight¹

        Rates:  0.24 to 0.35L/ac (0.6-0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7- to 14-day interval. Use higher rate and shorter interval when disease pressure is high.

Diseases:  Sclerotinia stem rot (white mould – Sclerotinia sclerotiorum) 

            Rates: 0.323L to 0.486L/ac (0.80-1.2L/ha) 

Application Information: Apply at 20-50% bloom prior to disease development to control white mould. Use the higher rate or shorter interval when disease pressure is high. Under high disease pressure, make a second application of another fungicide, from a different fungicide group, 7-14 days later.  A second application of Acapela Fungicide can only be carried out if both applications are at the lowest rate and if sprays are not sequential. 

Diseases: Crown rust (oats), Leaf rust (wheat, rye and triticale), Net blotch (barley), Powdery mildew (cereal grains), Scald (barley and rye), Septoria leaf blotch (wheat, rye, barley and triticale), Stripe rust (cereal grains), Tan spot (wheat)

Rate: 0.18 to 0.35 L/ac (0.44 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

To optimize yields in cereals, it is important to protect the flag leaf from foliar diseases. For optimizing yield and flag leaf disease control, apply Acapela™ at Feeke’s 9, ‘flag leaf out’.

Do not apply after flowering (Feekes 10.5).

Diseases: Northern corn leaf blight

Rates: 0.21 to 0.32 L/ac  (0.53 to 0.8 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.  For optimal disease control, apply at full tassel (VT) to milk stage (R3) corn.

Diseases: Tar Spot¹

Rates: 0.32L/ac  (0.8L/ha)

Includes the following: Adzuki bean, Blackeyed pea, Broad bean (dry), Catjang, Chickpea, Cowpea, Crowder pea, Field bean, Field pea, Grain lupin, Guar, Kidney bean, Lablab bean, Lentil, Lima bean, Moth bean, Mung bean, Navy bean, Pigeon pea, Pinto bean, Rice bean, Southern pea, Sweet lupin, Tepary bean, Urd bean, White lupin, White sweet lupin

Diseases: Mycosphaerella¹ blight (field peas), Asian soybean rust, Anthracnose (lentils and dry beans), Ascochyta blight (lentils)

Rates: 0.24 to 0.35 L/ac, (0.6 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

Diseases: Sclerotinia rot¹ (white mould)

Rates: 0.35 L/ac (0.88 L/ha)

Application Information: For white mould, make initial preventive application at beginning bloom and follow with 2nd application 7 to 10 days later at full bloom.

Diseases: Pasmo

Rate: 0.24 to 0.35L/ac (0.6-0.88 L/ha)

Application Information: Begin application prior to disease development or 7-10 days after flower initiation (approx. 20% bloom) and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high

Diseases: Yellow Rust

            Rates: 0.18 to 0.35L/ac (0.44-0.88L/ha) 

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval.  Use higher rate and shorter interval when disease pressure is high.

Diseases: Early blight, White mould

         Rates:  0.24 to 0.40L/ac (0.6-1L/ha)

Diseases: Late blight

        Rates:  0.18 to 0.40L/ac (0.44-1L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 10 day interval.  Use higher rate and shorter interval when disease pressure is high. 

Diseases: Asian soybean rust,  Brown spot (Septoria) , Frogeye leafspot (Cercospora sojina)

Rates: 0.18 to 0.35 L/ac (0.44 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

For foliar diseases, the optimal time for application is typically at the R2 to R3 growth stage (full bloom to beginning pod).

Diseases: Sclerotinia stem rot¹ (white mould)

Rates: 0.35 L/ac (0.88 L/ha)

Application Information: For white mould, make initial preventative application at R1 to R2 (beginning to full bloom) and follow up with 2nd application 7 to 10 days later.

Diseases: Alternaria leaf spot, Stem Canker, Black Stem 

            Rates: 0.24 to 0.35L/ac (0.6-0.88 L/ha)  

Diseases: Sclerotinia head & stem rot¹

            Rates:  0.323 to 0.40L/ac (0.8-1L)

Application Information: Begin applications prior to disease development an continue on a 7-10 day internal.  Use higher rate and shorter interval when disease pressure is high.

Diseases: Leaf Spot, Powdery Mildew, Suppression of Rust

            Rates: 0.24 to 0.40L/ac (0.6-1L/ha)  

Application Information: Begin applications prior to row closure and prior to disease development and continue on a 7 to 14 day interval.  Use higher rate and shorter interval when disease pressure is high.

Diseases: Rhizoctonia root and crown rot¹

            Rates:  12.2 ml per 100 m of row

Application Information: Apply as a banded foliar application at the 4 to 6 leaf stage.

Additional Information:  Do NOT apply by air.