Herbicide mixing order matters

Herbicide in water?

Mixing order matters!

There’s a proper order to combine water, herbicide, surfactant and any other additives that you’ll put in the tank and spray. Do it wrong, and you can actually reduce the effectiveness of your treatment.

The reason gets into finer points of chemistry. Bottomline: You can avoid the problem by simply following the mixing directions on the label.

Correct Order

For herbicide applications with water (not fertilizer), here’s the general procedure:

• Fill your sprayer with about half the water you’ll use. Begin agitation.
• Add the herbicide. Continue agitation.
• Add additives such as surfactant or drift control agent and deposition aids. Continue agitation.
• Add the rest of the water and continue agitation.

Don’t premix your herbicide with surfactant or other additives. It creates, at least, potential for a problem. Add them separately according to label directions.

Agitation here means recirculation or vigorous shaking. It’s critical.

Most tractor-powered sprayers will have a recirculating pump. You can shake a backpack sprayer. If you’re using something in between, find a way to provide agitation. One way is to start with less water in the tank, then add herbicide and additives a little bit at a time while using a garden hose to add water and stir.
 

Dilute and agitate!

Blending herbicide in liquid fertilizer has some real benefits. You save a trip, and you don’t feed weeds.

But, if you do your own mixing and application with liquid fertilizer, be aware of a few potential pitfalls, say Dow AgroSciences Range & Pasture experts. You can avoid  those by following the mixing steps precisely.

GrazonNext® HL herbicide is the most common in these weed-andfeed programs. It seldom requires a compatibility agent to mix with liquid fertilizer, but there are times. If you have any doubt, do a jar test to see if the elements will stay in solution.

Some potential pitfalls: The lower the temperature of the liquid fertilizer, the greater the chance you’ll have trouble mixing in herbicide. Mixing GrazonNext HL with blended nitrogenphosphorus or nitrogen-phosphorus-potassium solutions is  more difficult than with straight liquid nitrogen. Mixes with  sulfur also have been more difficult. Always do a jar test before mixing with fertilizer blends, the experts say

Mixing Mistakes

Most mixing problems occur because of one or two mistakes.

The first is when an operator doesn’t dilute the herbicide with water before adding it to the tank. Before you add GrazonNext HL to liquid fertilizer, dilute the herbicide with water at a 1 to 1 ratio or 1 to 2 ratio (one part herbicide to one to two parts water) making sure it is thoroughly mixed. 

The second common mistake is not having enough agitation during mixing and application.

Both dilution and agitation are essential to a successful mix of GrazonNext HL and liquid fertilizer, the experts say, regardless of the formulation.

Finally, follow these steps faithfully for a successful application:

1. Dilute herbicide in water (1 part herbicide to 1 to 2 parts water) and agitate before adding to the fertilizer solution. If possible,  add the water and herbicide to the tank first, and then add the liquid fertilizer. 
2. Maintain continuous, vigorous agitation throughout mixing and application without interruption. 
3. Apply the mixed solution as soon as mixing is complete. Do not store the spray mixture. 
4. Don’t apply in freezing or very cold weather. The likelihood of mixing or compatibility problems with liquid fertilizer increases under cold conditions. 

Remember, liquid fertilizers themselves can cause yellowing of grass or other foliage. This usually disappears after the first significant rainfall. 

^™®Trademarks of Dow AgroSciences, DuPont or Pioneer, and their affiliated companies or their respective owners. Milestone is not registered for sale or use in all states. Contact your state pesticide regulatory agency to determine if a product is registered for sale or use in your state. State restrictions on the sale and use of Remedy Ultra apply. Consult the label before purchase or use for full details. Always read and follow label directions.

Herbicide in liquid fertilizer? 
DuraCor™ herbicide mixes easily into UAN or dry fertilizer

Compared with 2,4-D and all the 2,4-D-containing herbicides over the years, DuraCor™ herbicide offers a different experience in mixing and handling, say Corteva Agriscience experts.

That’s partly because DuraCor doesn’t contain 2,4-D, and:

• It doesn’t look like 2,4-D.
• It doesn’t smell like 2,4-D.
• It doesn’t mix like 2,4-D.

“The first thing the people notice about DuraCor is that it has virtually no odor — really none,” says Jerome Otto, a Nebraska-based market development specialist for Corteva Agriscience.

Last summer, Otto mixed and applied DurCor for a series of Innovation Showcases highlighting the new product. Then he repeatedly demonstrated the mixing of DuraCor into chilled urea ammonium nitrate (UAN) fertilizer at the field days.

“It never failed to go into solution,” he says.

Before mixing, Otto kept the liquid fertilizer on ice for 24 hours. That was to simulate the real-world experience of adding herbicide to a tank of UAN on an early spring morning — when temperatures could still be quite cool. 

A challenge with 2,4-D-containing herbicides is the potential in the cold to coagulate into solids in the fertilizer solution. “‘Snotballs’ is one technical term used,” Otto offers. The problem can be minimized with an extra mixing step or two, but it does slow down the process.

“In contrast, DuraCor goes into solution in cold UAN extremely well with just a little agitation,” Otto says.

In his demonstrations, he added DuraCor herbicide to a container of chilled UAN, tightened the lid and inverted the container twice. That was enough to put the herbicide into solution with the fertilizer. In a sprayer, normal agitation will do the trick, he says.

Retailers also can use DuraCor to impregnate dry fertilizer. It’s a simple process for the retailer. The herbicide is sprayed on the dry fertilizer granules or pellets during the blending process.

To get an adequate dose of herbicide properly distributed, the herbicide should be applied in at least 200 pounds of dry fertilizer per acre. That’s the same process used with GrazonNext® HL herbicide since 2010. But it’s even easier now with DuraCor, Otto says.

“DuraCor is a more concentrated herbicide, so we’re using about half the rate of GrazonNext HL,” he says. “We’re putting half the amount of liquid on dry fertilizer, so it’s less tacky.”

The herbicide still works the same through dry fertilizer: Rainfall puts the herbicide and fertilizer into the soil. Weed control is almost entirely dependent on the soil residual activity of the herbicide and root uptake by the weeds.

Several of the mixing benefits of DuraCor are related to the suspension concentrate (SC) formulation, unusual among older pasture herbicides. As with all SC formulation types, Corteva recommends shaking or mixing the product prior to application for best results.

“If you’re handling jugs, that means shake well — just a quick up-and down turn with the jug, not like the cans of paint at the paint store,” Otto says. For drums and totes, Corteva recommends mixing for 30 minutes before the beginning of spray season and for 30 minutes once a month during the season. 

Connect with Range & Pasture:
    

^™®Trademarks of Dow AgroSciences, DuPont or Pioneer, and their affiliated companies or their respective owners. Milestone is not registered for sale or use in all states. Contact your state pesticide regulatory agency to determine if a product is registered for sale or use in your state. State restrictions on the sale and use of Remedy Ultra apply. Consult the label before purchase or use for full details. Always read and follow label directions.